HOT TIP #3

DIGITAL TV CONVERTER BOX WITH DIGITAL VIDEO RECORDER

If you’ve recently purchased the Aluratek Digital TV Converter Box with Digital Video Recorder (Model ADTB01F), congratulations! This device allows you to access free over-the-air TV broadcasts, convert them to your TV, and even record shows to watch later. Follow this step-by-step guide to set up and use your new device effectively.

What’s in the Box?
Before getting started, ensure you have the following items:

1. Aluratek Digital TV Converter Box with Digital Video Recorder
2. Remote control (batteries not included)
   
3. RCA-Y cable
4. User manual

Features of the Digital TV Converter Box with Digital Video Recorder

• Electronic program guide and program information
• Favorite channel list
• Parental control function
• Auto scanning (finds all digital broadcasts)
• Auto, 16:9 pillar box, 16:9 pan and scan, 4:3 letter box, 4:3 pan and scan, 4:3 full, 16:9 widescreen
• Closed captioning
• Real-time recording and scheduled recording
• 1080p Full HD output, CVBS output
• Sleep timer
• USB multimedia player
• Supports QAM
• Input: RF (Antenna) / Output: HDMI, RCA, Coaxial (audio)
• Limited 1-Year Warranty

Step 1: Connect an Antenna (required, not provided)

1. Plug your over-the-air antenna’s cable into the RFIN port on the back of the converter box.
2. Position the antenna in a location where it can receive the best signal. Typically, near a window or higher elevation works best.
   
   Here is a listing of antennas on Amazon for you to choose from. Please be sure that the antenna you choose has a coaxial connection to the Digital TV Converter Box.

Step 2: Connect the Converter Box to Your TV

1. If your TV has an HDMI port, connect the converter box to your TV using the an HDMI cable. Plug one end into the HDMI OUT port on the converter box and the other end into your TV’s HDMI input. An HDMI cable is recommended for higher video quality.
2. If your TV does not have an HDMI port, use an RCA cable (included). Connect the VIDEO OUT and AUDIO OUT ports on the converter box to the corresponding RCA inputs on your TV.
3. Turn on your TV and select the appropriate input source (e.g., HDMI or AV) using your TV’s remote.
   

Step 3: Power Up the Device

1. Connect the converter to a wall outlet.
2. Turn on the converter box using the power button on the remote or the device itself.

Step 4: Setup the Converter Box

1. Use the remote control to navigate through the on-screen setup menu.
2. Select your language preference.
3. Perform a channel scan:

• • Navigate to Settings > Channel Search.
  • Select “Auto Scan” to search for available channels in your area.
  • Once the scan is complete, save the channels found.

Step 5: Connect a USB Storage Device (required for recording, not provided/included)

1. Insert your USB storage device into the USB port on the front of the converter box.
   

Step 6: Watch TV

1. Use the channel up/down buttons on the remote to browse through the available channels.
2. Adjust your antenna if needed to improve reception for certain channels.

Step 7: Record and Playback TV Shows
To Record a Program:

1. While watching a channel, press the Record button on the remote.
2. The recording will start immediately and be saved to your connected USB drive.
3. To stop recording, press the Stop button.

To Schedule a Recording:

1. Navigate to Settings > Schedule Record in the menu.
2. Select the channel, start time, and duration for the recording.
3. Confirm the schedule and ensure your USB drive is connected during the recording time.

To Play Back a Recording:

1. Go to the USB section in the menu.
2. Select the recorded file you want to watch and press OK to play.
   

Tips for Optimal Performance:

• Signal Strength: Reposition your antenna if channels are not clear or missing after a scan.
• USB Compatibility: Use a USB drive with at least 16GB of storage and ensure it’s formatted correctly.
  
• Firmware Updates: Periodically check the Aluratek website for firmware updates to improve device functionality.

Troubleshooting

• No Signal: Ensure the antenna is properly connected and placed in an optimal location.
• Recording Issues: Check that your USB drive has enough free space and is properly formatted.
  
• Remote Not Working: Replace the remote’s batteries and ensure you’re pointing it directly at the device.

Conclusion

For an in-depth view into additional settings for the Digital TV Converter Box with Digital Video Recorder, please view the owners manual here.

The Aluratek Digital TV Converter Box with Digital Video Recorder is a versatile tool for accessing and recording over-the-air TV broadcasts. By following these steps, you’ll be able to enjoy your favorite programs with ease and save hundreds of dollars every year by moving away from cable TV. Happy watching!